Made especially for use with the Slicer Blade and Speed Blade, this belt is probably overkill for all other blades and it costs a little more. It has a Kevlar flocking and crisscrossed webbing that holds the rubber together so that it can't easily split.

 SKU: 289606f
Price: $36.45 (USD)

This kit is equipped with helpful tools for completing any project, from cutting straight lines to perfect circles and precise angles. Includes 3 angle guides, bevel edger, straight edge, circle guide, and printed instructions. As an added bonus the Taurus 3 Accessory Kit comes with the new Taurus 3 DVD, "Everything You Wanted To Know, But Were Afraid To Ask."

 SKU: 289601ak
Price: $22.75 (USD)

This kit includes a standard blade and two replacement orange groove grommets (without bearings). To install the orange grommets, remove the grommet assemblies from the saw. Cut the old grommets off from the bearings using a sharp knife and discard. Press the new grommets onto the bearings until seated, and reinstall.

 SKU: 2896011
Price: $76.25 (USD)

A new entertaining and educational DVD that explains all of the mysteries of the Taurus 3 Ring Saw. Includes everything from how to cut to when and how to perform general maintenance. Also covers all the new Taurus 3 accessories.

 SKU: 62001
Price: $7.95 (USD)

For dense materials. Because of its "tear drop" shape, the Mega Blade is Gemini Saw's strongest blade ever. This blade is used differently than the omni-directional blades. It is cuts mainly on the front and back, so to create a curve you will guide the material around the blade. The Mega blade is so rigid that it has the ability to damage the saw itself if used improperly by pushing too hard. So keep in mind the “golden rule” to let the saw do the cutting and do not force the material. This blade is exclusively for the Taurus 3 Ring Saw.

 SKU: 2896012
Price: $84.45 (USD)

This is a single orange grommet for a Taurus 3 Ring Saw. The inner bearing is not included. To install, simply remove the existing grommet from the saw. Cut the old grommet with a sharp knife to remove it from the bearing. Install the new grommet by pressing it onto the bearing until seated, then reinstall.

 SKU: 28965g
Price: $4.45 (USD)

Standard replacement drive belt for the Taurus 3 Ring Saw.

 SKU: 28960070
Price: $21.95 (USD)

The new Taurus 3 Ring Saw Blade Stabilizer reduces grommet wear dramatically. It also gives you more control and stability when cutting thicker material. The Stabilizer adjusts easily to accommodate different thickness material. Perfect when using the standard blade, separating blade, mega or slicer blade. The Stabilizer will fit all previously purchased Taurus 3 Ring Saws without any modifications, and will be included with all new Taurus 3 Ring Saws at no additional cost.

 SKU: 2896013
Price: $19.95 (USD)

The Taurus Blue Pulley Assembly is used on both the Taurus II.2 and the Taurus 3 Ring Saw. Each ring saw uses five of these assemblies to route the belt around the blade and the drive pulley. This assembly includes an R4 double bearing.

 SKU: 28965p
Price: $12.70 (USD)

This kit is equipped with helpful tools for completing any project from cutting straight lines to perfect circles and precise angles. Contents LED Light: Powered by 3 AA batteries (not included). Attaches to the back of your saw with velcro (included). Great for adding light and removing shadow from the work area. The Straight Edge: This tool gives the ability to cut straight lines, which would ordinarily be very difficult with your ring saw. Fits anywhere on the saw's work surface. Circle Maker: This item works on any location of the work surface and helps to create perfect circles. Hole Reducers: These fit inside the hole of the work surface to keep small pieces of material from falling into the saw and jamming the rotating assembly which could lead to rapid wear, failure and even blade breakage. Note: These hole reducers only work for the Taurus II models. 30/60 Degree Cutoff Triangle: Works in unison with the straight edge to cut a 30 or 60 degree angle. 45 Degree Cutoff Triangle: Works in unison with the straight edge to cut a 45 degree angle. Bevel Edge Maker: This works in unison with the straight edge to make perfect 45 degree beveled edges. Lamp Wedge: Use the lamp wedge to put a 30 degree bevel on the edge of a finished piece. This will allow the pieces to fit together more tightly, allowing for a smaller, stronger solder joint. Face Shield: This piece attaches to the front of the saw and keeps flying debris and water away from your eyes. Instructional Video: This video demonstrates the use of the Taurus II.2 accessories.

 SKU: 289607
Price: $54.95 (USD)

This is a three hour training class, edited for video. The video covers all of the main facets of the Taurus II.2 maintenance and operation. VHS format.

 SKU: 2896vid
Price: $22.15 (USD)

Cuts brass, brass crowned lead or copper came. Will also cut steel rebar. Smooth wheel without teeth—will not hang-up. Wheel is 1/16" larger than the standard toothed blade so some modification to the safety guard may be necessary on older saws.4-1/6" x .035" (103 x .89mm) thick. 1/2" (13mm) centered hole.NOTE OF CAUTION: Improper use may cause the motor to overheat.Fits Glascor Mini-Miter II and Power Miter saws.

 SKU: 2771aw
Price: $11.95 (USD)

The perfect way to put the fun back into recycling all those glass bottles and jars that seem to accumulate around the house, while transforming them into useful items such as hanging planters, terrariums, bowls, and candle holders. The Armour Bottle and Jar Cutter features an exclusive floating head design that allows you to cut bottles and jars of various shapes and sizes. Kit Contains: Adjustable Bottle Cutter, two cutting wheels, glass tapper, adjustment wedge, five glass sanding sheets for finishing the cut edges, and a twenty-four page, full color bottle cutting reference guide.

 SKU: 2789
Price: $29.15 (USD)

The Gryphon Miter Saw is particularly well suited for cutting brass, zinc, and lead came. It has a very fine abrasive blade which cuts cleanly and coolly resulting in a minimum of flash. A large adjustable table provides settings for accurate angles. The chop saw design along with the built in clamp for the work and safety shield provide protection to the operator. This saw offers the following features: - Simple construction. - Powerful 1.1 peak hp direct drive motor. - Large work surface. - Adjustable angle of cut with protractor scale for repeatability. - Thumbscrew clamp to hold work securely to fence while cutting. - Easy one-hand operation. - Ultra-thin abrasive blade provides very clean and quick cuts. - Made in USA. Saw Specifications: - Input Power Requirements: 115 volts AC - Motor Construction: Permanent Magnet DC - No Load Motor Speed: 7000 rpm - Motor Speed while cutting: 5500 rpm - Peak Motor Power: 1.1 hp - Typical Motor Power: 0.5 hp - Warranty: One year Blade Specifications: - Blade Construction: Fiberglass reinforced - Blade Diameter: 5.625 inches - Blade Thickness: 0.035 inch

 SKU: 2825
Price: $238.15 (USD)

This saw's hallmarks are very fast cutting and the best reliablity in the industry. This saw offers the following features: - New High Speed Motor for fastest cutting available. - Simple construction with few moving parts. - Powerful motor located on top, away from the water. - Direct drive - no belts or pulleys. - Huge water reservoir under the work surface. - One square foot of unobstructed work surface. - Under table blade guide and new blade guide above table. - Made in USA. Specifications: - Motor: 1/3 hp Direct Drive DC - Motor Speed: 2850 rpm - Blade Speed: 40 mph - Platform Area: One Square Foot - Coolant System: Recirculating tap water - Coolant Reservoir: 10 inches by 9 inches - Tension Adjustment: Single Knob - Semi-automatic - Blade Dimensions: 37" circumference, .020" wide, .140" deep - Warranty 1 year (saw), no time limit (blade)

 SKU: 2897
Price: $322.45 (USD)

The Gryphon Omni-2 Diamond Wire Saw offers the omni-directional cutting of a round blade along with the ability to make inside cuts without a lead-in. The Omni-2 offers the following NEW features: • Faster Motor • Built-in Pump • Three blades included • Significantly longer blade life • Five year limited warranty Gryphon replacement Wire Saw Blades are available in three grits. In addition, a flattened "Slitting Blade" offers a thinner cut and faster cutting. Additional features: - Round Diamond Blade cuts in any direction. - Powerful Motor cuts glass and other hard materials more quickly than before. - Built-in automatic pump eliminates need for fresh water reservoir and used water container. - Simple construction with few moving parts for reliability. - Powerful motor located on top, away from the water. - Direct drive - no belts or pulleys - One square foot of unobstructed work surface. - Small, built-in spot light shines directly on your work, eliminating shadows. - Uses very inexpensive Diamond Blades in your choice of 3 grits. - Made in USA. - Instructional DVD included with each saw. - Five-year limited warranty (excludes standard wear parts). Specifications: - Motor: 1/4 hp Direct Drive DC - Motor Speed: 5000 rpm - Dimensions: 19" tall, 14" deep, 13.5" wide - Platform Area: One Square Foot - Coolant System: Built-in automatic pump recirculates water from base of saw - Adjustments: None. The finger-guard is fixed, preventing you from "stacking" glass for cutting. - Blade Base Diameter: .063" - Warranty: 5 years

 SKU: 290315
Price: $332.15 (USD)

The Gryphon Zephyr Diamond Ring Saw offers advantages not found in other glass saws. The round blade can cut in any direction, and operation is very smooth and quiet. The Zephyr saw has a large work surface that is free of obstructions. The overhead blade support is slender, allowing the artist to have a very clear view of the material as it is cut. In addition, the Zephyr has a deeper throat and more clearance for the glass than other consumer glass saws. Special attention has been given to designing the saw for quiet operation and for low maintenance. The critical moving parts are shielded to minimize the abuse from the glass dust that is generated when cutting. The highest quality bearings and wheels are used to extend the life of these critical parts. The motor/blade assembly is a separate unit that can be removed from the base and used as a hand-held saw. This is useful for cutting items that cannot easily be brought to the table. A small water reservoir is built into the blade assembly housing and will hold enough water for a few minutes of hand-held cutting. When the saw is used in the normal configuration (installed in the base), the base will hold enough water for several hours of cutting. The Gryphon Zephyr will cut glass, tile, rock and all other similar hard materials. This saw offers the following advantages: MUCH quieter operation 20% deeper throat (6-5/8" vs. 5-1/2") 2x height clearance (1-1/2" vs. 3/4") Longer lasting bearings and wheels When used as hand held, not necessary to attach separate housing cover Convenient finger grip for hand held operation Specifications: Motor: 1/3 hp Direct Drive DC Motor Speed: 3000 rpm Overall Dimentions: 18" by 18" by 11" Platform: 17.5" by 17.5" Coolant System: Recirculating tap water Blade Dimensions: 7" diameter Warranty: 3 years - excludes normal wear parts

 SKU: 28251
Price: $374.95 (USD)

The Inland DB-100 Mini Band Saw is the first diamond band saw engineered and designed to be a multiple use tool that cuts glass, stone, and a whole lot more. Key Features: - The DB-100 saws dozens of materials, wet or dry. It includes a diamond blade for sawing glass, ceramic, tile, stone, marble, porcelain, plastics, shells and more. - The optional WoodCut and MetalCut blades saw wood, plastics, fiberglass, leather, thin brass and copper, tin, printed circuit boards and more. - Replaceable BladeSert blade guides make the most intricate cuts simple. The upper blade guide is adjustable for varying material thickness. - The coolant system provides a continuous, regulated flow of clean coolant to the diamond blade for wet sawing. - The five part spring-loaded tension system, molded into the frame, insures proper wheel alignment, simple blade setup and perfect tracking hour after hour. The spring-loaded tension system acts like a shock absorber to protect and enhance blade life. - The motor type is permanent magnet, high torque, with built in speed control. These are powerful DC motors that more consistently maintain torque as speed decreases. - Integrated internal drain channels and drain tubes collect and funnel excess, dirty coolant away from the blade and prevent it from re-circulating throughout the saw. - The work surface is made of machined aluminum 9" x 10". Drain channels funnel coolant into the internal drain system for a clean, clear view while sawing. - The frame, cover, and water reservoir are molded entirely from structural grade thermoplastic. - All frame and interior support walls are extra thick for maximum strength and durability. - Its rigid and quiet. The molded plastic housing absorbs and deadens sawing and motor sounds for quiet operation. The plastic construction makes it extremely light weight and easy to handle. - Two Year Full Confidence Warranty Product Uses: - Saw stone geodes, bottles, sea shells and marbles in half - Saw all types and textures of stained glass - Make wood, stone or glass jigsaw puzzles - Cut multiple pieces simultaneously - Cut intricate pieces and shapes - Reduce scrap by getting the piece on the first try - Cut complex patterns - Make scale stone or brick walls from the real material - Saw tile for authentic scale flooring - Saw ceramic and flooring stone for home installation Product Specs: Construction: Injection molded, structural grade thermoplastic. Motor: Permanent magnet, speed controlled, up to 2800 RPM. Torque: 48 oz.-in. Work surface: 9" x 10" Size: 8" high x 10" deep x 12" wide. Weight: 9.0 pounds Throat Depth: 4.75" (12 cm) Cutting Depth: Maximum material thickness: 3" (7.6cm), up to 1" solid slab glass, up to 3" diameter bottle. Minimum Radius: 3/16" (.5 cm)* Maximum Radius: 4.75" (12 cm) Cutting Speed: Dependent on material type and thickness. Up to 12"/minute (30.5 cm/minute) Voltage: 115 VAC * Note that tighter radii can be cut but may cause increase wear on the back edge of DiamondCut CopperAlloy blades resulting in increase wear and premature breakage.

 SKU: 2895
Price: $181.55 (USD)

4" (102mm) bench-top power saw for cutting zinc and lead. Using a unique spring steel cutting blade, straight and angle cuts are made easily and accurately on zinc. All-metal saw comes equipped with cutting blade and a specially designed guard for chip deflection.Blade height is adjustable to 5/8" (16mm). Saw can be used on small wooden and plastic parts leaving neat, burr-free edges. Protective eyewear is recommended when using this saw. Eye shield is not available as shown.Motor: . . . . . . . . . . . . . . . . . . . .1/16 HP, 6000 RPMElectrical: . . . . . . . . . . . . . . . .110 volt A.C. (60 hz)Blade: . . . . . . . . . . . . . . . . .4" diameter, .016" thickBlade Composition: . . . . . . . . . . . . . . .Spring SteelDimensions: . . . . . . . . . . . . . . . .5-1/2" x 7-1/2" x 5"Net Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . .6 lbs.

 SKU: 2760
Price: $119.95 (USD)

The MK Diamond Products MK-370 EXP features a powerful high-torque universal motor with maintenance-free, self-lubricating pinion and gear-box assembly. A tilting head allows for precise 45 degree miter cuts. Features: Variable height cutting head allows for plunge cutting. Sliding aluminum die-cast cutting table rips 18" glass or tile 3/4" diameter chrome-plated linear guide-bar system Single piece zinc-plated steel frame for rigidity, strength and durability Hinged blade guard for easy blade changes Heavy duty on/off switch Built-in water pump receptacle Removable thermoplastic water reservoir MK-Safeswitch prevents saw from being operated when locking key is removed Includes: 7" Wet Cutting Diamond Blade (replacement blades available) Submersible Water Pump Rip Guide Specifications: CSA Approved One-year limited warranty Motor: 120V / 60Hz, 7.4 amps, 1-1/4 horsepower RPM: 6,000 Blade Capacity: 7" (178mm) Arbor Size: 5/8" (16mm) Depth of Cut: 2" (51mm) Depth of Cut at 45 degrees: 1-1/8" (32mm) Length of Cut: 18", diagonally cuts 13" Weight: 33 lbs. (15kg) LxWxH: 33" x 19" x 20" (838 x 483 x 508 mm)

 SKU: 29040
Price: $499.95 (USD)

For internal cuts, omni-directional. The Separating blade is the same size as the Standard blade and has exactly the same cutting action. The difference is that the Separating Blade is made from a stainless steel wire that is coated with the same high quality process as all our blades and then has a coupling attached to it which is also coated for protection and smooth action. This blade gives you the ability to open the blade, slide it through, reattach and make internal cuts with no entry point.

 SKU: 2896rb4
Price: $75.95 (USD)

Thinnest curf ever for Taurus 3. The Slicer blade is ideal when removing the least amount of material is desired. This blade gives you the ability to use more of your material and as a byproduct actually cuts faster than any of our ring blades. It is highly recommended for use with our Super Slicer. The Slicer blade is flat, giving it strength when cutting forward and backward, because of this the cutting will be only be from the front and back. Cutting from the sides will not only be very slow but will damage the grommets.

 SKU: 2896slic
Price: $83.95 (USD)

The next generation ring saw. The perfect saw for cutting glass, including dichroic, rippled and fused glass. The entire working part of the saw snaps out of the water bath and contains its own water so that it can be used as a portable hand saw. This allows working on the edges of the pieces that were before too large to bring to the saw such as plate glass, tile and stone. This feature also makes the saw easy to clean. Features: Fewer and longer lasting parts. Extreme extended life means virtually no maintenance. Built-in, flip-up face shield. Twenty-five percent larger work surface than the Taurus II. Greater blade exposure plus a built-in intense bright white light surrounds the blade while the saw is on. This makes seeing your work easier. Constructed with metal reinforced polycarbonate. 3-year warranty. The Taurus 3 Ring Saw also cuts in all directions, grinds as it cuts and blades last many times longer than other diamond coated blades.

 SKU: 2896
Price: $407.75 (USD)

A professional sized ring saw that has the best features of the Taurus I at an affordable price. Slim design allows cutting with greater accuracy. Fewer moving parts require very little maintenance. Lighter weight makes it easy to transport. Smoother grid work surface prevents sticking. 2-year warranty. Specifications: Motor: 1/5 HP Electrical: 110 VAC (60 Hz) Throat depth: 5-1/2" Blade: .050" thick, 80 grit Blade Composition: Stainless Steel Blade Life: 50-60 hrs. Glass Cutting Speeds: 1/8" glass up to 6" per min. Dimensions: 18" x 10" x 12-1/2" Gross Weight: 11 lbs.

 SKU: 289605
Price: $319.95 (USD)

This incredible device holds pattern bars and other small items for slicing in such a way that allows repeated perfectly parallel thin cuts to be made. Never before has it been easier to increase production and get the most out of pattern bars, canes, streamers, rods, millefiori or anything that needs to be sliced. The slices can be repeated without readjustment or made individually with precise adjustment. Although designed for the Taurus Ring Saws, the Super Slicer will fit almost all saws including band saws, trim saws, jig saws, etc.

 SKU: 15370
Price: $30.75 (USD)

The Titan cuts straight lines up to 12 inches long every time. It accomplishes this by way of a carriage tray that moves forwards and backwards while it stays perfectly aligned with the rigid ring blade. Makes trimming a cinch. The Titan comes with a Megablade that is very fast cutting and leaves an extremely smooth edge. Titans can expose a full 3 inches of blade. This makes it perfect for cutting not only pattern bars, glass tile, millifiori, stained glass, glass tubes, rods, streamers, etc. but also cuts bottles, vases and other tall and hollow pieces. Fantastic for hard to cut three dimensional blown glass. The Titan can also be used to cut curves both forward and backward in stained glass, tile, ceramic, stone and a host of other materials. Included with the Titan are triangles for cutting 45/90/30/60 degree angles. Titans will fit on any table with a footprint of 12 by 18 inches. SPECIFICATIONS: 1/5 Horsepower Motor 110 Volt, 50-60 Hz

 SKU: 289905
Price: $441.95 (USD)