This 3-piece set from Glastar includes a 10" adjustable straight-edge which requires no tools, with snap-on placement anywhere on the work surface for longer straight edges with less vibration. Fits grinding heads up to 1". It also includes a 45-degree miter guide ideal for box angles, and a round mitering wedge ideal for grinding glass edges for lampshade construction.

 SKU: 247115
Price: $22.65 (USD)

These trays take the mess out of grinder clean up and maintenance. When your grinder reservoir is full, remove the tray and dispose of it. Simply replace with a new tray; and in less than a minute, you can start working again. Made of recyclable material.(Fits Super Star II and Diamond Star)

 SKU: 274150
Price: $13.95 (USD)

A framework fixture that supports a sheet of clear glass or plexiglass (not furnished). Glass lifts up and out of the support for easy cleaning. Accommodates 1/8" thick glass.

 SKU: 2741esp
Price: $11.65 (USD)

Finally, all those little grinder parts in one convenient kit! Now, you will always have extras on hand when you need them. Includes: 1 - 3/4" Top Plate Insert 1 - 1" Top Plate Insert 4 - Grinder Head Set Screws 2 - Grinder Stoppers 1 - Allen Key 6 - Grinder Sponges

 SKU: 2741ak
Price: $6.65 (USD)

Made of hard polycarbonates; protects eyes and face from flying glass chips.Fits all Glastar grinders.

 SKU: 2741mes
Price: $11.75 (USD)

Fits top of Glastar grinder, and permits the user to grind straight-sided rectangles or squares to an exact size.(Up to 6" for All-Star, 3-3/4" for Super Star II and Diamond Star).

 SKU: 2741seg
Price: $10.35 (USD)

Glastar Top Plate for Super Star II and Diamond Star Grinders, including G7, G12, and G14. This sturdy top plate comes with inserts to accommodate both 1" and 3/4" grinding heads.

 SKU: 2741tpg7
Price: $15.95 (USD)

Glastar Top Plate for All-Star Grinder.

 SKU: 2741tpg8
Price: $17.35 (USD)

Glastar Top Plate for Diamond Star Grinder. This sturdy top plate comes with inserts to accommodate both 1" and 3/4" grinding heads.

 SKU: 2741tpg5
Price: $11.95 (USD)

Attaches for convenient support when grinding with the 1/4" or 1/8" head. The table's water well supplies enough coolant for approximately 30 minutes of grinding. Fits all Glastar and Inland grinders.

 SKU: 2741umt
Price: $14.65 (USD)

German made, this handy tool securely holds glass as small as 1/4" for grinding. Designed to lay flat on the grinding table to save time and bruised fingers.

 SKU: 2051
Price: $23.65 (USD)

The Grinder Cookie: Great Results Without The Grind This unique device saves wear & tear on your fingers while grinding glass. It positions and holds glass during grinding, extending the life of your grinder head. Simply push the Grinder Cookie against the glass, and steady the glass with your free hand. Then, turn the cookie to feed the glass into the grinder at a slow, steady rate. Works with any grinder!

 SKU: 240511
Price: $8.95 (USD)

 SKU: 2750spg
Price: $0.95 (USD)

This face shield provides added protection against grinder and saw dust and debris. Key Features: Large 10" x 8-1/2" face shield. Attaches to any open grid work surface. Lifts off easily to clean. Keeps you safe and clean. Product Uses: Provides added protection from grinder and saw debris. Fits all Inland grinders, SwapTop machines, Kristall, and PowerKits. Fits all other makes and models of grinders.

 SKU: 2750es
Price: $14.95 (USD)

The GrinderStation is a must have for any one who owns a grinder, router or table saw!Key Features:- Fully adjustable to fit around any grinder.- It's made of washable vinyl.- Keeps your work area clean and safe by containing grinder over spray.- Printed with lots of helpful grinding information and tips.Product Uses:- Set up around the back and sides of your grinder, router or table saw to contain over spray.- Keep your work area clean and safe.- 4 panels opens to 25" (64 cm ) wide x 12" (30 cm) high.

 SKU: 2753gs
Price: $14.95 (USD)

The MagnaShield face shield is a big 12" x 9" with an optical quality convex magnifying surface. It makes it easier to see what you are grinding while providing protection against grinding chips and debris.Key Features:The MagnaShield has an optical quality convex surface which magnifies the area around the grinder bit.Makes your grinding and sawing lines easier to see.Reduces eye fatigue, allowing longer grinding sessions.Easily attaches to any Inland grinder, Kristall, SwapTop, and PowerKits saw or grinder.Removes easily for cleaning or storage.Product Uses:Use anytime you want a better view of what you are grinding.Follow intricate grinding lines and patterns more precisely.Reduce eye strain and fatigue for longer grinding sessions.Size: 12" (30 cm) x 9" (23 cm)

 SKU: 2750ms
Price: $14.95 (USD)

Prevent your grinder bits from freezing to the motor shaft! Apply a small amount to the motor shaft every time you move or change a bit or diamond disc. 0.5 oz tube. Key Features: Teflon based lubricant helps prevent "frozen" bits. Helps keep grinding and sawing dust out of motor shaft.

 SKU: 28151
Price: $3.95 (USD)

The SecondStory Work Surface makes grinding easier!Key Features:Elevating the work surface makes using the smaller grinding bits easier.Keeps the glass level, preventing angled edges.The self contained coolant reservoir keeps the bits lubricated, allowing for longer bit life.Fits all Inland grinders and other brands with an open grid work surface.Product Uses:Use the SecondStory work surface any time you are grinding on the upper bit.Works on all Inland and Kristall glass grinders.Construction: Injection molded high impact plastic.

 SKU: 27502nd
Price: $14.95 (USD)

Save your fingers!Key Features:Made of strong synthetic rubber for long life.Safely grind even small pieces.Comfortable and easy to use.Product Uses:ThumbSavers easily and comfortably fit on your thumbs and lock onto the edge of the glass so you can safely guide the glass against the grinder bit.

 SKU: 2753tp
Price: $5.85 (USD)

Replacement work surface. Fits the following Inland models: - Aero - Contour - ContourGT - Impulse - TwinSpin - Wizard IV - WizCG - WizlingCG This work surface is r eversible, and it fits the current style of BitSerts.

 SKU: 2765g
Price: $16.75 (USD)

Replacement work surface for Inland grinders. Fits the following models:- Wizard (1981 - 2002)- Wizard Plus (1981 - 2002)Features:- T-lock holes for use with TwinSpin RetroFit Kit- Modified for current style BitSerts

 SKU: 27500100
Price: $16.95 (USD)

This foot switch works with your tools to free your hands for working. It has a handsome steel housing that is painted black with nonskid base pad and foot treadle pad. The low profile and light pressure reduces fatigue.

 SKU: 2750fs
Price: $32.15 (USD)

The MagicCutter: The Ultimate Companion Tool for the Table Foiler This simple tool is used with the Table Foiler. It cuts foil right in the roller, saving your expensive foil. Faster & easier to use than scissors!

 SKU: 240512
Price: $11.75 (USD)

An inexpensive grinding tool that really works!- Grips glass firmly.- Protects finger tips.- Moves smoothly.- Improves accuracy.- Improves grinding speed.- Keeps glass 90 degrees to grinding head.- Frees hands for supporting glass.- Makes grinding fun.

 SKU: 20512
Price: $22.25 (USD)

The Only System That Provides Continuous Water, Continuous Cleaning and the Enjoyment of Continuous Grinding! The patent pending Aqua-Flow System features micro-tubular brush bristles attached to a highly durable polymeric holder. The system that not only provides continuous water to your grinder head, but also cleans simultaneously at a suprisingly affordable price. The Aqua-Flow System is available as a complete system with replacement brushes sold seperately. Features Continuous Water Flow: The Aqua-Flow System microtubular brush bristles transfer water from the reservoir to the grinder head continuously, requiring the addition of water only at the onset of grinding. This feature allows you to work continuously on you glass art object - without annyoying and unnecessary interruptions. Anti-Clog Technology: Conventional Sponges suffer from sludge build up in the pores of the sponge, causing clogging. This occurs repeatedly, making it necessary to continuously clean the sponge. These tasks are cumbersome, messy and inconvenient. With the Aqua-Flow System, anti-clog technology allows water to flow continuously, drawing sludge away from the grinding bit. Prevents Dry-Out: With conventional sponges water needs to be added every 10 - 15 minutes after grinding is commenced, due to dry out. With the Aqua-Flow System, the brush bristles do not absorb water and sludge, nor do they dry-out, eliminating the need for constant cleaning and hydration. Prolongs Bit Life: The life of your diamond-grinding bit will be prolonged; this is because the microtubular brush bristles constantly clean the grinder head while supplying water continuously. This feature maximizes the life of the grinding bit, ultimately saving you money on replacement. Self-Locking Snap-In Holder: An equally important advantage of the Aqua-Flow System is its self-locking snap-in holder. Once the Aqua-Flow System is inserted, it will not detach as conventional sponges do. You will no longer need to search for the trajectory sponge. Grinder Reference Chart Glastar Diamond Star: AFS-D/S Glastar Super Star: AFS-D/S Glastart All Star: AFS-A Inland (except Impulse): AFS-I Replacement Brush (Glastar & Inland - All Models): AFS-B

 SKU: 2746
Price: $8.70 (USD)