Everything a beginner could want to start diamond point glass engraving. This hand-held engraving kit for soft (soda lime) glass contains three interchangeable points for decorating and personalizing. Includes one each small and medium diamond tips, shading tip, and handle. Additional tips are available separately.

 SKU: 24641
Price: $25.15 (USD)

This hand tool will bend brass, copper, and zinc into circles or ovals. The came bender will bend the border channels, flat H's, and round H's in the three separate groves of the tool. You can make circles three inches wide and larger. It will not bend the single sided U channel. Roller should be lubricated as used. Aluminum frame screws onto a work bench. Forming rolls are 2-1/2" (63mm) in diameter.

 SKU: 2231
Price: $91.85 (USD)

Opens and closes links of electrical chain without marring the surface.

 SKU: 8090
Price: $16.95 (USD)

Stone for edging glass. 10"x1-5/16"x3/4". Aliminum oxide.

 SKU: 2461
Price: $6.95 (USD)

Includes aluminum miter box and metal cutting saw. Miter box has slots for accurately cutting 45° and 90° angles. One piece of aluminum measures 5-1/4" x 1-3/4" (133 x 44mm) with table lip. Saw blade has serrated teeth suitable for cutting non-ferrous metals such as zinc, copper, brass and lead. Blade is easily removed from handle for replacement. Measures 5" x 1-1/4" x .011" (127 x 32 x .3mm).

 SKU: 20230
Price: $17.95 (USD)

Drives points into frames with ease. Magazine of 100 stacked points are driven into the frame flat against the glass surface one at a time, and provide 4 times more holding surface than brads.

 SKU: 2476
Price: $90.95 (USD)

General purpose brush for applying flux to your stained glass project.

 SKU: 2452
Price: $0.55 (USD)

Soft bristle revolving brush for use on a handheld electric drill. A handy tool for scrub cleaning glass and metal. Bristles are 1-1/2" (38mm) long. Tightly tuffed to 4" (102mm) diameter. Spindle 3/8" (10mm) fits most 1/4" drills.

 SKU: 27915
Price: $17.10 (USD)

This vise can be mounted over the edge of your work table. It utilizes a strong spring and grooved teeth to keep lead came in place while stretching. It's made of die-cast aluminum for years of trouble-free use.

 SKU: 25101
Price: $12.25 (USD)

Specially designed for the glazing industry. One head is rubber for use on glass. The other head is hard plastic for use on lead or nails.

 SKU: 2200
Price: $8.55 (USD)

Handi-Bender is a rugged cast aluminum bending jig for use on board, bench or in a vise. It has three steel bending pins. Includes instructions for making basic bends such as centered and offcentered eyes, curves, angles, circles and spirals. Instructions also cover wire straightening, soldering and wire cutting. Diagrams of shapes that can be made with the Handi Bender are included.

 SKU: 24555
Price: $15.95 (USD)

The Inland EasyMark Electric Engraver is a lightweight power tool for engraving on glass, stone, plastics and more. Use it to create custom designs, add detail, sign your work, and even identify your valuables. Key Features: - The EasyMark Electric Engraver is light weight, comfortable to hold and easy to control. - It is UL approved, with an 18,000 RPM high speed 12 volt motor. - Comes complete with a removable diamond small ball tip. - Additional diamond tips are available to create different effects. - Tips are very easy to change. Simply pull out the old one and press in the new one. Product Uses: - Because of its multifunction capabilities, the EasyMark can be used by the basic hobbyist as well as the skilled professional. - Use it to create your own detailed, etched designs on glass, glass ware, stone, marble and granite. - Use it to sign and date your work or to engrave identification on valuables. Product Specs: Construction: Lightweight impact resistant plastic with textured handle. Size: 6" x 3.5" Weight: 10.6 oz.

 SKU: 2316
Price: $27.95 (USD)

The Inland GlassStation keeps all of your tools handy and keeps you organized!Key Features:- Space is provided within the GlassStation for pattern pens, lead and foil pattern shears, craft knives, breaker / groziers, breakers, lead nippers, running pliers, other hand tools, foil, solder, soldering iron (has a built-in coil-type iron holder), tip cleaning sponge, flux bottle well, flux brush and drip-back-into-the-bottle brush holder.- Coil-type, soldering iron holder (which screws into a brass stem modeled into the housing for stability) .- Brass flux brush holder.- Flux brush.- The copper foil holder section has a tape dispenser and tear-off bar which separates the paper backing from the foil as it is dispensed. It accommodates 4 rolls of copper foil.- Built in retractable handles make it easy to carry.- A tray located in the front provides space for miscellaneous items such as pens and small tools.Product Uses:- The GlassStation is a space saver. Condensing the area tools occupy on a work bench and holds them vertically in an easy to access fashion.- Provides basic organization for all of the commonly used tools and supplies for producing a stained glass project, arranged from left to right in the order they are used.- The GlassStation is made of high-impact injection molded plastic that will not melt if solder is accidentally dripped onto it.Product Specs:Construction: Molded PlasticSize: 14" x 5" x 6"Weight: 24 oz.

 SKU: 21211
Price: $26.65 (USD)

2-1/4 x 7-1/2" (63 x 190mm) Four rows with 12 tufts 1" (25mm) long.

 SKU: 2459
Price: $5.65 (USD)

This hand tool cuts a perfect notch out of both sides of a single sided U-channel came with a simple push on the handle. The notcher is available in either a 45-degree or 90-degree notch angle, and is designed for either zinc or brass U-channel cames, not H-channel cames.

 SKU: 24810
Price: $49.95 (USD)

Made in the USA, this solid maple vise is easy to use for holding came or rebar while cutting straight 90°, 45° and 22.5° angles. May be screwed down by hand for use. Instructions included.

 SKU: 2025
Price: $26.95 (USD)

A pure brass scrubber for cleaning metal prior to patina application. Does not break off or rust under solder seams as steel wool does. Will not react with metal alloys. Leaves a clean, smooth finish. Easy on the hands.

 SKU: 24511
Price: $2.85 (USD)

This lightweight, rigid metal box is 11-1/2" x 15" x 3-3/8" (292 x 381 x 95mm), with a baked-on finish which can be wall-mounted. Folding handle also serves as a tilt-top support. White acrylic top. Clear glass can be added (not supplied) for glass cutting. Provides daylight fluorescent light, 15 watts, 115 volts. On/Off switch, 8 ft. (2.4M) U.L. listed cord and plug. Weighs 7 lbs. (3.2 Kg).

 SKU: 7258
Price: $78.95 (USD)

Designed for safety. Features a comfortable no slip handle for glazing. Stainless steel retains edge.

 SKU: 2507
Price: $9.95 (USD)

This hefty table brush is great for sweeping glass shards. It works well as a general pupose brush. 13-3/4" long with handle. 15 bristle tufts 2-5/8" long.

 SKU: 2457
Price: $5.55 (USD)

1-1/2"x4-3/4". White tampico bristles with hardwood handle. Four rows with 12 tufts 5/8" long.

 SKU: 2458
Price: $2.75 (USD)

Black plastic contoured grip handle with stainless steel bristles. 7" (178mm) long.

 SKU: 2453
Price: $1.95 (USD)

Designed using the simple principle of leverage, the Stanton Stretcher makes the tedious job of stretching lead came effortless in a studio of any size. Comes with a table top lead vise that can be attached approximately 70 inches from the Stanton Stretcher. The Stanton Stretcher takes the danger out of stretching lead came and is capable of stretching 1/8" to 5/8" lead came with ease. The Stanton Stretcher is easy to install. All you need is a screw driver to mount the three wood screws to any work bench and you're ready to go. Attach the Stanton Stretcher to the edge of your work bench. For best results, attach the other lead vise approximately 69 to 70 inches from the Stanton Stretcher.

 SKU: 21212
Price: $68.95 (USD)