This 4-Prong Lightweight Spider is made of 12-gauge wire, 4-1/2 inches (114mm) in diameter. Finished in bright brass.

 SKU: 82062
Price: $3.95 (USD)

This 4-Prong Spider is made from 10 gauge bright brass, and measures 8-1/2 inches (216mm) across.

 SKU: 8206
Price: $4.25 (USD)

Adaptor to fit Odyssey T342 Wisteria shade onto WB01 or WB50 base.

 SKU: 8475ad01
Price: $38.75 (USD)

Brass plated harp with detachable base. Available from 4" to 10" in length.

 SKU: 808
Price: $2.75 (USD)

Embellish your home decor, make a seasonal statement or give a unique & practical gift! Base fits standard lampbase screws to create your own beaded finial!Base is about 3/4" wide at the bottom and a little over 1/2" high. The rod is almost 2-1/2" long and will accomodate beads made on 3/32" mandrel. Rod is threaded at both ends to add or exchange beads.

 SKU: 16702
Price: $4.65 (USD)

Solid brass ring. Concave for set screws of fitter cap. For caps 2-1/4" (58mm) diameter.

 SKU: 8020006
Price: $3.05 (USD)

Solid brass. Includes screw and nut to secure to nite-lite.

 SKU: 8219ws
Price: $0.65 (USD)

Solid brass night light clip. Clips easily to most nite lite shades. Solders well.

 SKU: 8219
Price: $0.65 (USD)

Brass Vented Shade Caps are available in five sizes:- 3" (76mm) diameter- 3-1/2" (89mm) diameter- 4" (102mm) diameter- 4-1/2" (114mm) diameter- 5" (127mm) diameter

 SKU: 80060
Price: $2.75 (USD)

1-1/2" (38mm) diameter, fits Mini Base socket, 40 watt. Bulb is frosted glass.

 SKU: 806740
Price: $2.45 (USD)

Heavy-duty, with everything needed for ceiling fit.

 SKU: 8080
Price: $9.15 (USD)

Candelabra base socket and spring clip mounting bracket. Fits into a 1" (25mm) hole to secure socket. 8 ft. (2.4m) cord w/switch and plug.

 SKU: 8102
Price: $5.25 (USD)

On/off switch, mounts in-line with electrical lamp cord.

 SKU: 8201
Price: $1.65 (USD)

3/4" Female Loop with an antique brass finish. 1/8 IP female thread.

 SKU: 8207
Price: $0.65 (USD)

Hexagon Fan Base with an antique brass finish. Complete with electrical cord, socket, plug and on/off in-line switch. Uses a candelabra base bulb or standard nightlight bulbs (not included).

 SKU: 85681
Price: $11.85 (USD)

Six Side Brass Cap

 SKU: 8014
Price: $3.75 (USD)

1-3/8" (35mm) diameter. Clear 40W bulb with a medium screw base. Recommended for use with short lamp harps.

 SKU: 8068
Price: $1.85 (USD)

This clear nite-lite bulb is for use with horizontal socket mini. May also be used for stained glass nite-lite or fan lamp bases.

 SKU: 8065
Price: $0.75 (USD)

 SKU: 8220
Price: $0.60 (USD)

Plugs directly into wall outlet. Uses 6 or 7 watt candelabra base bulbs. On/off switch in front.

 SKU: 8561
Price: $2.35 (USD)

This adaptor fits the Odyssey T349 Wisteria shade onto the WB10 base.

 SKU: 8475ad02
Price: $25.45 (USD)

Pentagon Cap,Large

 SKU: 8013
Price: $4.25 (USD)

Scalloped hexagonal metal base with brass finish. Complete with cord, switch and light socket. Uses candelabra bulb (not included). Dimensions: 4-1/4" x 3-3/4" x 1-1/4".

 SKU: 8571
Price: $15.65 (USD)

A simple but efficient fixture for soldering seams in a stained glass lamp shade. The arm moves into any position for uniform soldering. Supports shades to 20".

 SKU: 2823
Price: $41.55 (USD)

Shade Riser with a bright brass finish. Available in heights of 1/2" (13 mm), 1" (25 mm), or 1-1/2" (38 mm). 1/4-27 M x 1/4-27 F threads fit a harp post.

 SKU: 8203
Price: $1.35 (USD)

2-3/4" x 2-3/4" (70 x 70mm). Especially suited for use with Prairie Design Lampshades, these stamped brass vase caps with solid brass center hole slip a standard 1/8" (3mm) I.P. (3/8" diameter pipe).

 SKU: 80112
Price: $2.95 (USD)

For use with panel display bases or fan lamp bases. Clear glass bulb, with dimensions 3/4" x 2" (20 x 51mm). 120 volt bulb fits a candelabra socket.

 SKU: 8066
Price: $1.45 (USD)

These round brass vase caps are made from spun brass, and are unfinished and unlacquered.

 SKU: 8001
Price: $1.85 (USD)

These ventilated shade caps are heavier than the stamped or spun caps. Made of cast brass, the visible top surface is polished smooth. Available in three sizes.

 SKU: 9064
Price: $6.95 (USD)

Hardware for hanging wall lamps (sconces). Package Contents: (1) Clear Wall Fixture Plate (1) 10' Cordset w/ Bfly Clips & Candelabra Socket (1) In-Line-Switch (not attached) (1) 3/8" Snap-In-Bushing (3) #10x1" Screws for Wall Mounting (3) #1012 Plastic Anchors (use 1/4" drill) (2) 6-32 Machine Screws for Wall Box Mounting Solder one of the available brass support bars to your sconce project, and hang it on this wall fixture. The fixture mounts to the wall with screws and anchors (included). It accepts a light bulb (not included), and can be plugged into the wall, or optionally hard-wired by an electrician. An in-line switch is included (separately).

 SKU: 8221
Price: $13.35 (USD)

A beautiful early 1900's style floral design embossed on 15/16" x 0.025" pre-polished solid brass band. The band is held together with brass rivets for an authenitic antique hand made look. The band comes assembled to fit standard 4", 5" and 6" WordenSystem lamp shade aperture openings. Also included are Paper Patterns and a special Glass Crown Assembly Guide and Circle Jig to make and solder the foiled Crown together; it is difficult to solder the crown together without this special Guide and Circle Jig.

 SKU: 9044cb
Price: $9.95 (USD)

These brass sectional pieces fit the 10" (254mm) Wisteria, Cherry Tree and 13" (330mm) Begonia.

 SKU: 9040
Price: $27.35 (USD)

Sectional pieces for a 18" (457mm) shade. Cast brass tree branches to fit the Worden Wisteria, Trumpet Vine, Grape Vine and Cherry Tree lampshades. These are fashioned after the original, the polished brass castings assemble into a vented crown.

 SKU: 9041
Price: $79.95 (USD)