Made especially for use with the Slicer Blade and Speed Blade, this belt is probably overkill for all other blades and it costs a little more. It has a Kevlar flocking and crisscrossed webbing that holds the rubber together so that it can't easily split.

 SKU: 289606f
Price: $36.45 (USD)

This kit is equipped with helpful tools for completing any project, from cutting straight lines to perfect circles and precise angles. Includes 3 angle guides, bevel edger, straight edge, circle guide, and printed instructions. As an added bonus the Taurus 3 Accessory Kit comes with the new Taurus 3 DVD, "Everything You Wanted To Know, But Were Afraid To Ask."

 SKU: 289601ak
Price: $22.75 (USD)

This kit includes a standard blade and two replacement orange groove grommets (without bearings). To install the orange grommets, remove the grommet assemblies from the saw. Cut the old grommets off from the bearings using a sharp knife and discard. Press the new grommets onto the bearings until seated, and reinstall.

 SKU: 2896011
Price: $76.25 (USD)

A new entertaining and educational DVD that explains all of the mysteries of the Taurus 3 Ring Saw. Includes everything from how to cut to when and how to perform general maintenance. Also covers all the new Taurus 3 accessories.

 SKU: 62001
Price: $7.95 (USD)

For dense materials. Because of its "tear drop" shape, the Mega Blade is Gemini Saw's strongest blade ever. This blade is used differently than the omni-directional blades. It is cuts mainly on the front and back, so to create a curve you will guide the material around the blade. The Mega blade is so rigid that it has the ability to damage the saw itself if used improperly by pushing too hard. So keep in mind the “golden rule” to let the saw do the cutting and do not force the material. This blade is exclusively for the Taurus 3 Ring Saw.

 SKU: 2896012
Price: $84.45 (USD)

This is a single orange grommet for a Taurus 3 Ring Saw. The inner bearing is not included. To install, simply remove the existing grommet from the saw. Cut the old grommet with a sharp knife to remove it from the bearing. Install the new grommet by pressing it onto the bearing until seated, then reinstall.

 SKU: 28965g
Price: $4.45 (USD)

Standard replacement drive belt for the Taurus 3 Ring Saw.

 SKU: 28960070
Price: $21.95 (USD)

The new Taurus 3 Ring Saw Blade Stabilizer reduces grommet wear dramatically. It also gives you more control and stability when cutting thicker material. The Stabilizer adjusts easily to accommodate different thickness material. Perfect when using the standard blade, separating blade, mega or slicer blade. The Stabilizer will fit all previously purchased Taurus 3 Ring Saws without any modifications, and will be included with all new Taurus 3 Ring Saws at no additional cost.

 SKU: 2896013
Price: $19.95 (USD)

The Taurus Blue Pulley Assembly is used on both the Taurus II.2 and the Taurus 3 Ring Saw. Each ring saw uses five of these assemblies to route the belt around the blade and the drive pulley. This assembly includes an R4 double bearing.

 SKU: 28965p
Price: $18.25 (USD)