en <![CDATA[Tracy's Stained Glass Workshop - Pâte De Verre]]> Listing http://www.tracysworkshop.com/c-16877-pte-de-verre.aspx Copyright © 2006 Tracy's Stained Glass Workshop list <![CDATA[Hotline Pate de Verre & Fusers Glue, 4 oz]]> http://www.tracysworkshop.com/pc-4719-16877-hotline-pate-de-verre-fusers-glue-4-oz.aspx  SKU: 48752
Price: $5.65 (USD)

]]>

This glue is excellent for holding glass layers, stringers and fractures in place while assembling them for fusing. It can also be used for frit casting on vertical walls. It will not leave a carbon spot residue like other glues. It is a slow-setting glue, and will not repel Spray "A" devit spray. 4 fluid ounces (118ml).

 SKU: 48752
Price: $5.65 (USD)

]]> 5.6500 370 Hotline 48752 <![CDATA[Hotline Pâte De Verre Glue]]> http://www.tracysworkshop.com/pc-17194-16877-hotline-pte-de-verre-glue.aspx  SKU: 48753
Price: $12.95 (USD)

]]>

Holds stringers, fractures and glass layers together while assembling for fusing. Burns off clean without residue. Ready mixed 1 liter (32 fl. oz.) bottle.

 SKU: 48753
Price: $12.95 (USD)

]]> 12.9500 817 Hotline 48753 <![CDATA[Hotline Primo Primer]]> http://www.tracysworkshop.com/pc-4472-16877-hotline-primo-primer.aspx  SKU: 48235
Price: $7.95 (USD)

]]>

New and Improved! Announcing a breakthrough in kiln shelf priming. Hotline Primo Primer fires to 1550°F (843°C) and higher. The glass does not stick to the shelf, and the primer does not stick to the glass. It can be removed from shelf after firing by brushing or by wiping with a damp sponge. No more tedious and messy scraping. Packed in easy access plastic containers.

 SKU: 48235
Price: $7.95 (USD)

]]> 7.9500 4529 Hotline 48235 <![CDATA[Hydrocal Gypsum Cement, 25 lb]]> http://www.tracysworkshop.com/pc-2434-16877-hydrocal-gypsum-cement-25-lb.aspx  SKU: 15401
Price: $37.95 (USD)

]]>

Hydrocal white is harder than the usual casting plaster. Excellent for casting and sculpting. It also serves well for molds or models. For parting molds, a parting agent (separator) must be used. Hydrocal is an indoor material and not to be used outdoors. Must be stored in a dry atmosphere to avoid absorbing moisture. A 4.5kg mixture requires 2040-2077 ml of water (10 lb of mix to 69-77 fl. oz. of water). Setting time: 25 to 35 minutes Expansion: At final setting, 0.390% maximum Compression strength: 5000 PSI Available in a 25 lbs. (11.4 kg) box.

 SKU: 15401
Price: $37.95 (USD)

]]> 37.9500 1393 15401 <![CDATA[Hydroperm Castable Mold Mix, 25 lb]]> http://www.tracysworkshop.com/pc-16337-16877-hydroperm-castable-mold-mix-25-lb.aspx  SKU: 154013
Price: $48.35 (USD)

]]>

Excellent for casting and sculpting. Used to produce permeable plaster molds for glass, ferrous metals and alloys. Does not require a coating of kiln wash so the glass will capture fine details. It may be used in conjunction with all types of forms, including metal. Available in a 25 lbs. (11.4 kg) carton.

 SKU: 154013
Price: $48.35 (USD)

]]> 48.3500 1690 154013 <![CDATA[Silica Flour, 200 mesh, 5 lb]]> http://www.tracysworkshop.com/pc-14929-16877-silica-flour-200-mesh-5-lb.aspx  SKU: 154015
Price: $9.95 (USD)

]]>

Ultra-fine additive to give strength to plaster casting molds.Various references report adding 20-40% silica to hydrocal increases temperature range and durability of the casting mold. Common plaster has a maximum temperature range of 1300°F. Adding silica increases the safe range to 1450°F, the typical casting temperature. Pre-mix dry with hydrocal before sifting into water. Available in a 5 lb box.

 SKU: 154015
Price: $9.95 (USD)

]]> 9.9500 1475 154015