Work around hot kilns, furnaces and torches without burning hands and arms. For use on hot solid surfaces only. Machine washable and dryable Nomex IIIA. Comfortable, flexible and breathable cotton terry lining.

 SKU: 48166
Price: $30.75 (USD)

Work around hot kilns, furnaces and torches without burning fingers and hands. Constantly handle materials 500°F or less and intermittently handle materials up to 700°F. Not recommended for constant handling above 700°F. Glove withstands accidental contact with flame or solid hot objects up to 2000°F. For use on hot solid surfaces only. Machine washable and dryable 100% Nomex IIIA. Comfortable, flexible and breathable. One size fits all. Seamless stretch knit.

 SKU: 48163
Price: $52.25 (USD)

Easy-to-use kit for creating fused glass bracelets. Kit includes two stainless steel molds (small and medium/large), graphite forming tongs, and instructions.

 SKU: 16052
Price: $132.95 (USD)

Combine and conquer! Bullseye Mullite clay Hot Damz are used to contain thick fused slabs when creating multi-layered imagery in thick formed blocks. Three sizes of Hot Damz are available (6", 8", and 10"). Use Hard Fire Brick as bracers.

 SKU: 1540
Price: $7.95 (USD)

A portable heat temperature measuring meter suitable for kilns that have a detachable thermocouple. The stand places the meter at an easy to read angle. Large digital numerals show kiln temperature. Available in Fahrenheit or Celsius mode. Complete with "K" type thermocouple and stand. Reads max temp. of 1742°F (950°C) for up to 15 minutes or 1562°F continuous. (Continuous use at the higher temp. will reduce the life of the thermocouple.)

 SKU: 489015
Price: $59.95 (USD)

Hot Box lid with clear glass window allows viewing projects while they are in fusing or slumping mode. 3.5" x 1.5" (90 x 38mm). Zero coefficient glass, withstands kiln’s full heating capacity. Replaces lid supplied on existing kilns.

 SKU: 15197
Price: $92.95 (USD)

KISS is a full featured computer software program that allows you to program, monitor, collect firing data and start/stop your kiln using your PC!! KISS can control and monitor up to 10 kilns equipped with the RampMaster II controller. Installation is simple: connect the harness to the RampMaster II control board and any available PC COM port, install the software and you're ready to go. Main Window - Displays the status of all connected kilns. Just click on a kiln to check its status. Kiln Status Window - Displays and controls all sorts of "need to know stuff" like current temperatures, status of firing, current set point and segment, current program, hold times, etc...... Definitely the most used screen of the KISS program. Programming Window - Develop your personal firing profiles in the Programming Window or choose among a list of pre-set programs. What's Needed? - To begin with you will need the The KISS Starter Kit (SM-1). This kit includes all the necessary hardware and software to get you going. Installation is very easy. No really, it is! If you have more than one kiln you simply need the KISS Kiln Kit (KM-1) to connect the remaining kilns. To say it another way, the KISS Starter Kit (SM-1) is designed to connect the first, initial kiln to your personal computer. In order to connect additional kilns, up to 9 more, use the KISS Kiln Kit (KM-1). PC System Requirements: Windows XP, 2000 or 98 5MB of Disk Space Equipment Requirements: The KISS software/hardware packages are designed for exclusive use with kilns fitted with the Evenheat RampMaster II Temperature Controllers.

 SKU: kiss
Price: $399.95 (USD)

The Piggyback Bead Annealer is a bead annealing chamber designed to be used with an existing Hot Box or similarly sized kiln. Simply remove the lid from your Hot Box and place the Piggyback Bead Annealer on top. You're ready to anneal your beads!! The Piggyback Bead Annealer does not produce its own heat, therefore it contains no heating elements. All heat production and temperature control is performed by your existing Hot Box. You can now convert your fusing kiln into a bead annealer quickly and economically. The Piggyback Bead Annealer contains a built-in pyrometer for precise annealing control and a flip-up door for easy insertion of beaded mandrels. We recommend using on kilns with an interior chamber opening no greater than 8" x 8".

 SKU: 15180
Price: $217.35 (USD)

Separate temperature measuring device that is immediately compatible with a variety of manufactured kilns. Includes a thermocouple with lead wire, a meter with an easily readable face which registers temperature in both Centigrade and Fahrenheit. Can be wall- or kiln-mounted. Effective for a full range of temperatures from 0° to 2500°F.

 SKU: 4890
Price: $115.45 (USD)

Convert your manually controlled kiln into a fully automatic with our RampMaster II Wall Mount Controls. It's very possible and easy to do, just plug it in! Wall Mount controllers are stand alone, fully programmable, automatic temperature controllers. They are designed to be added to an existing, manually controlled kiln to provide for automatic operation. Available in a wide range of amperages. All units are single-phase. The RampMaster II Wall Mount Control is a controller package designed to "automate" a currently manually controlled kiln. The manually controlled kiln is "plugged into" (or direct wired) into the Wall Mount Control. The Wall Mount is then "plugged into" the power supply. Beyond that, the thermocouple is inserted into the kiln and it's ready to go. There are many manually controlled kilns out there and many users would like to automate them without having to throw away a perfectly good kiln. Thus, the reasoning behind the Wall Mount Controls. Can the RampMaster II be used on Any Manually Controlled Kiln? As a general rule, yes! When we speak of manually controlled kilns we speak of kilns fitted with a combination of on/off switches, infinite switches and low-medium-high switches, as well as Dawson Kiln Sitters. There are some types of kilns which may have these types of switches, among others, that are not fully manual. Let's call them semi-automatic? They may use motors to mechanically rotate switches and the like. In cases like this it's a judgment call. The odds are that a chaotic effect will result along with disappointment. Evenheat model series such as TnB and Fyrematic would fall into this group. Performance Details: Ramp Mode Programming: Develop your own firing programs using the Ramp Mode Programming Feature. You determine How Fast, to What Temp and for How Long. The RampMaster II gives you this power and more. Program the perfect fusing and annealing profile or that one-of-a-kind specialty glaze firing using the Ramp Mode Programming feature. This is absolutely perfect for glass firing. Ramp Mode Programming offers six individual programs, the contents of which, are defined by you, the user. Each of the six programs allows for up to eight firing segments. A segment is simply a grouping of: rate of temperature increase or decrease, a set point temperature and soak, if desired. So, get busy and develop that special firing program. The RampMaster II can do the work!! The RampMaster II does not contain pre-programmed or pre-set glass firing programs. Glass firing is a process that requires your attention and understanding, pre-set programs promote neither. "On-the-Fly" Skip Ahead: It's not uncommon when firing to want to stop what's currently happening and move ahead to the next programmed step. Ending a fusing or slumping operation because "it's just right" and moving to the anneal portion of the program immediately comes to mind. Of course, it's also nice if moving ahead was easy and didn't require a bunch of re-programming. The RampMaster II allows for this type of action, on-the-fly. A couple of keystrokes during operation will take the firing to the next segment. It's that easy. No stopping, no fumbling, just success. "On-the-Fly" Temperature Pause: For those moments when you need a little more time, or a little more heatwork, we offer the Temperature Pause. Simply press the Pause Key and the currently displayed temperature is held for up to 30 minutes. Pause can be turned off at any time by pressing the Pause key again. Use this feature to add time to your programmed hold times. Use it to hold the temperature during a ramping operation (yes, a ramping operation!). Use it to add heatwork (time/temp) which moves your glass slower and easier than just increasing the temperature. The Pause is going to be a good friend of yours. It's simple, effective and so easy to use. "On-the-Fly" Alarm: During firing it always nice to know when you're reaching a certain temperature. You can sit and watch but you have better things to do. With the RampMaster II you can set the Alarm to beep at any temperature you want. Simply set it. Once the kiln has reached the Alarm temperature it beeps. Pretty simple! If you've ever missed a setpoint or blew the chance to modify a firing because you didn't know it was time you'll see the value in this feature. We recommend setting the alarm to a temperature that will alert you to the fact that "your almost there". This gives you time to look, adjust, play and modify to your hearts content. One other thing, you can set the alarm at any time you wish to any temperature you wish, over and over again during a firing. Very cool stuff. "On-the-Fly" Firing Data: When firing, the RampMaster II displays the current chamber temperature or remaining hold time values. Other information such as current segment in use or reviewing the complete program is also possible to view while running a program. While firing, simply press the View Seg key to see what segment is currently being run. To view the entire programmed firing simply press Review Prog and the entire program is automatically displayed. "Back-Up" Feature: When programming it's sometimes necessary to back-up and change previously entered firing data. You know how it goes: your halfway finished programming and decide that the hold time you programmed on the first segment isn't right, or you want to bump up a set point temperature or rate that you've already entered. When this happens (and it will) you can simply "back-up" to the firing data you want to change using a single key. Once you've made the change just continue programming as usual. You'll get to know this feature, it comes in handy and saves time. Cone Fire Mode: The Ceramic, Pottery and Porcelain artists among you know that today's bisque and glaze firings have changed. Gone are the days when "close enough is good enough". With the advent of new lead free glazes and closer tolerance clays, the "close enough" game doesn't work! We must now, more than ever, consider the glaze/clay body fit or compatibility. For successful firing, modern ceramic ware requires attention to temperature rates, changes in rates during the firing, as well as the final cone number. The RampMaster II takes these considerations into account by offering four, pre-set firing programs: Fast Bisque (13 hours), Slow Bisque (10 hours), Fast Glaze (7 hours) and Slow Glaze (4 hours). Through the use of multiple temperature rate changes and temperature set points during the firing, each program is tailored to meet the needs of modern ceramic ware. Delay Start: Delay the actual start time of the firing using the Delay Start feature. This is great when electrical rates are lower at different times of the day or when it's just too darn hot to fire an extra kiln. Use your head here, folks. Evenheat recommends (and logic dictates) that you monitor a kiln during a firing. Things happen and it's best to know what your kiln's doing. Fahrenheit and Centigrade: Whether you prefer Fahrenheit or Centigrade, the RampMaster II has you covered. Changing between the two scales is fairly easy via the keypad. However, we haven't made it so easy where it can be changed by accident. Take your pick. Cone Table: Curious to know the equivalent cone temperature? Use the cone table to look up temperature equivalents of cones 022 through 10. (108°F table). Large LED Display: The term LED means "Light Emitting Diode" in tech talk. For everyone else it means lights and in this case the lighted display that indicates temperatures, times, etc.. The RampMaster II is equipped with a large, 4 character display that can easily be seen from a distance. It's also well lit which means it can be seen in relatively bright conditions. Advanced Features: Buried deep within the RampMaster II is a menu of advanced features. These include pre-heat's, ID numbers for PC connections, extending the number of segments available to 16, offsetting cone fire values, error code enabling, offsetting thermocouples as well as physical temperature of the electronic board. Personal Computer Connectivity: Special, optional software/hardware packages are available that allow the RampMaster II to be connected directly to your PC. This software allows you to program, monitor, graph and control your kilns via your PC. The software packages are known as KISS (Kiln Interface Software System). The KISS Starter Kit (SM-1) is needed to connect the first or initial kiln to your PC while the KISS Kiln Kits (KM-1) are used to connect additional kilns to your, now established, KISS network. Thermocouple: The RampMaster II uses a type K thermocouple.

 SKU: 4917
Price: $552.85 (USD)

For Evenheat kilns with kiln mounted Rampmaster II Controls. Converts a kiln-mounted controller to a handy handheld controller. With the controller in the hand or on the wall, it is convenient to program the kiln from a comfortable position. The firing status can be seen from across the room. Eight feet of cable allows for convenient wall placement. The retrofit assembly contains a pre-wired box with color coded wire terminals and easy-to-follow instructions. Control panel (not included) is removed from existing controller to fit on handheld power box.

 SKU: 4917rf
Price: $219.95 (USD)

Recommended for controlling temperatures of small kilns such as the Rapid Fire 6. Infinite control switch has Off, and Low to High setting positions. 120 Volts, 60 HZ AC, 15 Amp capacity with heavy duty cord, grounding plug and receptacle. Pilot light indicator. Control box measures: 5-1/8" x 4-1/8" x 3" (130 x 105 x 76mm).

 SKU: 488365
Price: $89.95 (USD)

Programming - The Set-Pro allows you to control the rate of temperature change, final temperature and any desired temperature hold time up to 8 times per use or firing. That's 8 segments of control that are simple to program and use. It should be noted that it's not necessary to use all 8 segments when firing. If only 1 segment is needed, just 1 segment may be programmed. Want to use only 2? It's possible. The point is that the Set-Pro, with its three buttons, is uncomplicated and easy. Four user programs are built-in. However, while firing minutes can be added to hold setting in 5 minute increments, the temperature may be increased in 5° increments. Program Data - Program data is entered in the following way: Temperature rates use a degree/hour format. Controlled rates can be either ascending or descending. Rates can be as slow as 1° per hour and as fast as "Full".Temperature setpoints are factory default in the Fahrenheit scale. The Centigrade scale is available special order. Hold times use an hour and minute format. Maximum hold time per segment is 99 hours. Skip Seg - For those times when "enough is enough" the Set-Pro allows you to skip or move ahead to the next segment.Very useful when you're satisfied with the current results and need to get to an anneal segment quickly. It's a welcome feature and comes in handy. View Seg - The View Seg feature shows what segment is currently running. Review - It's always a good idea to review the program before pressing Start. That's why it's included. Just have a peek at the program before starting. Please Note: This is a special order item, and ships in 2-4 weeks.

 SKU: 4918
Price: $559.95 (USD)

Heavy-duty mortar and pestle for crushing glass. Crushes glass rods, cullet, etc., to make frit and chips for all forms of Hot Glass work. Ideal for crushing glass for Pate-de-Verre and casting. All steel pestle bowl measures 2-3/4" (70mm) diameter x 3-1/2" (89mm) deep. Mortar fits bowl and has a 7" (178mm) handle. Mortar is a snug fit in the pestle bowl.

 SKU: 1534
Price: $159.95 (USD)

New Glass Embossing System from JP Glassworks.Create textures by embossing beautiful patterns directly into the piece. The system uses a series of small bronze components to impress designs into glass or in combinations. Embossed glass pieces create a world of possibilities for adornment pins, bracelets, pendants, tiles, picture frames and plates.

 SKU: 1598
Price: $25.55 (USD)

Careful application is necessary for the effectiveness of shelf primer. Confirmed by quality tests, the Haik Brush is excellent for applying slow, even and continuous strokes to molds and shelves.

 SKU: 4818
Price: $9.85 (USD)

Improves firing conditions while efficiently removing harmful and unpleasant fumes. Provides an oxidizing atmosphere for true reds and other colors. Eliminates hot and cold spots while removing fumes, including carbon monoxide. Downdraft ventilation draws a small amount of air through the kiln to pull out fumes and odors. Kiln vent reduces cool down time, eliminating lid-popping and manual venting.How it works: Small holes are drilled in the kiln lid to permit air to enter. Air is drawn through the kiln as fumes and odors leave through the bottom of the kiln where additional small holes are drilled in the base to provide access to the blower units below. Air can be vented outdoors through residential dryer exhaust duct (not included). Installs easily beneath the kiln, replacing the existing stand.The 18” square stand is used for 7, 3.3, and 2 cu ft models. The large 24” square stand is used for 10 cu.ft. top loading models. All models 115 volts, 1.1 amps.

 SKU: 4911
Price: $389.95 (USD)

Improves firing conditions while efficiently removing harmful and unpleasant fumes. Provides an oxidizing atmosphere for true reds and other colors. Eliminates hot and cold spots while removing fumes, including carbon monoxide. Downdraft ventilation draws a small amount of air through the kiln to pull out fumes and odors. Kiln vent reduces cool down time, eliminating lid-propping and manual venting.Installs into most kiln stands having at least a 12" x 12" opening and a 9" stand height. Mounting plates are 18" x 18" (457 x 457mm) or 24" x 24" (609 x 609 mm).How it works: Small holes are drilled in the kiln lid to permit air to enter. Air is drawn through the kiln as fumes and odors leave through the bottom of the kiln where additional small holes are drilled in the base to provide access to the blower unit below. Air can be vented outdoors through residential dryer exhaust duct (not included).For use with most top loading kilns. The 18” version services 7 & 3.3 cu ft kilns. The 24” services 10 cu ft kilns. 115 volts, 1.1 amps.

 SKU: 49113
Price: $359.95 (USD)

Rutland Fire Bricks are intermediate duty fire bricks, used for damming thick fused slabs, to build new fireplace fire boxes, or to replace broken fire brick. Service temperature is 2200 degF (1204 degC). Each brick weighs 3-3/4 lbs. (1200 g), and measures 9" x 4-1/2" x 1-1/4". Sold individually, or in boxes of six bricks.

 SKU: 48340
Price: $9.25 (USD)

This economy pyrometer is designed for use on small kilns. It includes a thermocouple with lead wire. Dial is calibrated in Fahrenheit ranging from 0° to 2200°. Includes mounting bracket.

 SKU: 48902
Price: $68.65 (USD)

UVP Mini UV Lamp, Model UVG-4, with a 254 nm wavelength. A battery powered detector to determine which is the tin side of a sheet of Float Glass. Simply place the UV lamp assembly window against the glass. The tin side will be foggy, the reverse side will be clear. Weighs only 7.5 oz. (340g). Measures 6- 1/2" long x 1-3/4" wide (165 x 45mm). Carry cord is attached. Powered by 4 AA batteries (not supplied).

 SKU: 52180
Price: $67.95 (USD)

Zetex gloves are made with highly texturized silica (glass) based yarns. Non-asbestos gloves have a manufacturers’ recommended temperature range of protection; 1500 - 2000 degF (815 to 1093 degC) direct heat. Wool-lined.

 SKU: 48162
Price: $60.25 (USD)