Flat bottom-fired clay crucible for melting glass. Available in four sizes: Capacity Top Diameter Height Wall Thickness 1 lb. (454 g) 3-1/2" (89mm) 5-3/8" (137mm) 1/4" (6mm) 8 lbs. (3.63 Kg) 6" (152mm) 7" (178mm) 1/2" (13mm) 7.2 lbs. (3.27 Kg) 4.5" (114mm) 8" (203mm) 7/16" (11mm) 49 lbs. (22.23 Kg) 8-3/4" (222mm) 12-5/8" (321mm) 1/2" (13mm)

 SKU: 4815
Price: $8.45 (USD)

Useful tool for “gathering” molten glass from a crucible or removing glass from the crucible at the end of a melt. Steel rod: 5/16" diameter, 24" long with a 1" ball on the end (609 x 4.8 x 25mm).

 SKU: 15273
Price: $32.15 (USD)

Adjustable steel glassblowers yoke. Ideal for use with a Murphy Fire Bucket or other table-based hot glassworking. Supports blowpipe or pontil. Base height is 7". Extends to 14".

 SKU: 15884
Price: $48.95 (USD)

A versatile, portable Glory Hole which functions like its larger counterpart. Operates on propane gas. The venturi gas burner has an adjustable sleeve for air intake. All metal exterior. Stainless steel outer body with steel framework. 1" thick insulation will withstand temperatures of 2300°F (1260°C). Hinged door to retain heat. This item ships via UPS. Dimensions: 15" L x 10" W x 15" H (381 x 254 x 381mm)Inner: 12" deep x 8" diameter (305 x 203mm)Door: 6" diam. (152mm) hinged for 8" diam. (203mm) access.

 SKU: 15310
Price: $484.95 (USD)

This tool includes a sturdy cast aluminum handle with grip and loop for hanging. The overall length is 13.5" with an 8" x 3" x 7/16" smooth carbon slab.

 SKU: 1529816
Price: $89.95 (USD)

This tool is the original American Made Diamond Shear. The blades are constructed from hardened D2 Die Steel. This shear is large and extremely long lasting. It is truly a lifetime lasting tool requiring infrequent sharpening. This shear will outlast any competitors shear.

 SKU: 1529712
Price: $129.95 (USD)

This Palmer footing tool is fabricated from cherry wood. This clapper style has a 304 stainless steel spring hinge that is attached to the cherry wood with aluminum screws. This combination of materials allows the footing tool to be kept submerged in water indefinitely.

 SKU: 15291211
Price: $74.95 (USD)

These jack handles are made of 304 stainless steel, with a stiff flex. The stainless steel construction gives the tool a lifetime rust free surface and this tough durable material keeps ther spring in the hinge at a constant tension with maximum adjustability. 3/4” flat style, with a 10” length. The blades are made of 304 stainless steel. The stainless steel construction of these blades makes them strong for their weight and also resistant in addition to the rust free quality of this material. The 3/4” flat blade is the ideal tool for paperweight makers because the thin width allows the maker to maintain a flat surface at the base of the weight minimizing the neeed for grinding. It is also very abrasion resistant so it will outlast other flat blades.

 SKU: 1529118s
Price: $109.95 (USD)

These Palmer jack handles are made of 304 stainless steel, with a stiff flex. The stainless steel construction gives the tool a lifetime rust free surface and this tough durable material keeps ther spring in the hinge at a constant tension with maximum adjustability. 1/4” round blade with a 7"length. The blades are all made of 304 stainless steel. The stainless steel construction of these blades makes them strong for their weight and also resistant, in addition to the rust free quality of this material.

 SKU: 1529415s
Price: $143.55 (USD)

Type 304 Stainless Steel spring grip handle with 10-1/2" (268mm) x 1-3/16" (30mm) diameter cherrywood rods. Entire tool may be immersed in water without a rust problem. A versatile tool!

 SKU: 1529520r
Price: $84.35 (USD)

The basis of this tool is the redwood cone. Only fine grain clear redwood is chosen for the manufacture of this tool. Redwood was chosen over cherry for this tool because redwood is more porous than cherry. This greater porosity allows more water to be held within the redwood leading to a much better steaming action. All aluminum components are used for the rotating flange and spindle so that they hold up well submerged in water. This rotating feature allows for ease of operation (easier to manipulate than others) while the fine grain redwood facilitates a superior seal to the glass. Soak in water for a week and it's ready to go.

 SKU: 1529973
Price: $76.75 (USD)

This Palmer Punty is made from 304 stainless steel end to end. It is a hollow, lightweight 11/16” diameter and 54" length, with a rubber grip.

 SKU: 15291454
Price: $85.35 (USD)

Grips and shears with ease. 4" (100mm) jaw. Length 9-3/4" (240mm). Hardened steel. Comfortable grip handle.

 SKU: 1530153m
Price: $199.95 (USD)

15-3/4" (400mm) Jacks with flat blades, blunt ends.

 SKU: 1526172a
Price: $96.95 (USD)

15-3/4" (400mm) Jack with oval blades and pointed ends.

 SKU: 1526171
Price: $96.95 (USD)

12" (305mm) Tongs, blunt type, equal width blades.

 SKU: 1526180
Price: $50.45 (USD)

12" (305mm) Tongs, shoulder type, pointed.

 SKU: 1526183
Price: $50.45 (USD)

12" (305mm) Tongs, shoulder type, curved points.

 SKU: 1526184
Price: $50.45 (USD)

If you haven't tried the blowpipe hose extension, you're in for a treat. The extension slides over the mouthpiece of any Steinert blowpipe, with a 90 degree swivel connector attached to a 6 foot piece of latex tubing that is equipped with a mouthpiece. The use of the extension will enable you to work a piece at the bench or glory hole without bringing the pipe to your mouth. Available in two sizes: 5/8" - fits a Steinert Extra Light Series blowpipe 3/4" - fits a Steinert Light Line, Standard,and Heavy Weight Series blowpipe

 SKU: 1533bpe
Price: $50.45 (USD)

This yoke is comprised of two 1" diameter balls, each resting on smaller balls which roll on a spherically contoured seat. This gives the yoke its fluid motion. The bent portion that holds these bearings is made from 3/16 x 1-1/4" steel and is welded to a 1" diameter shaft that is 12" long. The adjustable housing is 15" long and is meant to be welded to a floor stand.

 SKU: 15883
Price: $149.95 (USD)

Mini Blowpipe for Lampworking. It is made of stainless steel and are equipped with a stop collar, grip and Delrin mouthpiece. It is 18" long, with a 1/4" shaft that flares to 1/2" for gather.

 SKU: 15271
Price: $99.95 (USD)

Mini Punty Rod for Lampworking. It is made of stainless steel and is equipped with a stop collar, grip and Delrin mouthpiece. It is 18" long with a 1/4" shaft.

 SKU: 15272
Price: $66.95 (USD)