Holds 3/4" to 2-1/4" diameter (19 - 57mm) 14 gauge wire. Curved fingertips open and close with sliding collars to assure a firm grip on glass shapes. Curved tips are also designed to grip the inside of rings, tubes, etc.

 SKU: 156514
Price: $42.75 (USD)

Holds 7/16" to 1-3/4" diameter (11- 44mm) 16 gauge wire. Curved fingertips open and close with sliding collars to assure a firm grip on glass shapes. Curved tips are also designed to grip the inside of rings, tubes, etc.

 SKU: 156513
Price: $42.75 (USD)

Holds 3/8" to 1-1/4" diameter (9.5 - 32mm) 18 gauge wire. Curved fingertips open and close with sliding collars to assure a firm grip on glass shapes. Curved tips are also designed to grip the inside of rings, tubes, etc.

 SKU: 156512
Price: $42.75 (USD)

Fingers securely grip marbles or beads. Adjustable to hold 1/2" (13mm) to 1-1/2" (38mm) objects.

 SKU: 15655
Price: $33.95 (USD)

6-1/2" (165mm) length Once clamped, these tweezers won’t let go until released. Squeeze to open, release to close. Curved tips are finely serrated. Stainless steel with heat-resistant fiber grips.

 SKU: 157502
Price: $5.15 (USD)

9-1/2" (241mm) length A Tweezers-type tool with serrated open oval shaped ends. Ratchet at finger side locks when squeezed. Stainless steel construction.

 SKU: 157503
Price: $8.15 (USD)

Simplifies cleaning bead core after removing from the mandrel wire or rod. Set contains 2 each of 1.2mm, 1.6mm and 2.0mm scrapers. Use two at a time for larger diameter cores. Scraper rod has the appearance of “barbed wire”.

 SKU: 15781
Price: $6.75 (USD)

Handy tool for cleaning dried bead release residue from bead core. Steel barbed shaft 1/16" (1.6mm) diameter x 2" (51mm) long.Wooden handle.

 SKU: 15782
Price: $4.85 (USD)

Raking (combing) is the process of drawing a metal rod across the surface of softened glass. The rake is an 1/8" (3mm) stainless steel rod bent to 90° at the end. It has been sharpened to a point and slightly blunted to make a furrow in the molten glass. The rod is secured to a wooden handle.

 SKU: 153904
Price: $17.15 (USD)

Stainless steel rods excellent for beadmaking when coated with separator. 10 each.

 SKU: 1539
Price: $9.95 (USD)

4-1/2" x 2-1/2" x 3/4" (114 x 64 x 19mm) Designed especially for beadmaking, this paddle makes a smooth, round or cylindrical bead. Marvering wells are 1/2" (12.5mm), 5/8" (15mm), 3/4" (20mm), and 1" (25mm) in diameter. Mandrel slots allow the hot bead to rotate for either a sheer or rounded end. A convex 10mm head protrudes for indenting a concave bead end if desired. Smooth back makes the paddle dual purpose for conventional marvering.

 SKU: 157331
Price: $82.65 (USD)

3" x 6" x 1" (76 x 152 x 25mm) Beadmakers ask for this handy tool. A heavy-duty dual purpose mold and paddle. Bead wells on one side (flat surface on opposite side). Sturdy wooden handle. Eight bead wells (diameters): 6, 8, 10, 15, 18, 20, 25 and 30mm Two oval wells: 8 x 16mm; 9 x 18mm Four teardrop wells: 6 x 9mm; 8 x 12mm; 15 x 25mm; 18 x 30mm

 SKU: 15731
Price: $119.95 (USD)

A handy multi-purpose tool with a 6-sided stainless steel 90° pointed head. Has one flat-folded side and a curled side for making flutes, spirals, twists and various other shapes.

 SKU: 153601
Price: $9.40 (USD)

8" (203mm) length A useful lampworking tool. These traditional tweezers (squeeze to close) have sharp curved points. Pin assures alignment of closed points. Stainless steel.

 SKU: 157501
Price: $4.65 (USD)

For use when mouthblowing while glass is manipulated in the flame. Consists of a plastic mouthpiece, 6 feet (2.1m) of flexible hose and a 1/4" (6mm) right angle swivel.

 SKU: 1581
Price: $22.85 (USD)

Graphite paddle with nine cavities—two flat, three deep convex, one mild convex, three multi-depth.

 SKU: 157602
Price: $39.35 (USD)

2" x 3" x 3/8" (51 x 76 x 9.5mm) Ideal for beadmaking. Fine grain, high density graphite with a wooden handle.

 SKU: 15711
Price: $16.95 (USD)

Made of fine grain, high density graphite, these rods have many uses in the lampworking studio. Rods may be tapered in a pencil sharpener or on a sander. 12" (305mm) length.

 SKU: 1538
Price: $4.35 (USD)

This is an ergonomically-friendly workstation for the torchworker. It features a universal torch clamp to hold your torch in place and has a fully adjustable wrist and elbow rests. The Creation Station is designed to make fine detail work easier. It can be adapted to any torch size, including the Hot Head. The station is designed so that you can customize the entire unit to suit your lampworking needs.

 SKU: 156127
Price: $87.15 (USD)

This pin vise holds a variety of small tools securely for fine detail work. Each end has a double end collet which may be reversed to desired size. Nickel plated body is made of tubing to permit use of long wire or rods. 3-3/4" long with 5/16" body diameter.

 SKU: 15395
Price: $24.75 (USD)

Versatile marble mold has six cavities for forming 5/8", 3/4", 7/8", 1", 1-1/4", and 1-1/2" diameter marbles. (16, 19, 22, 25, 32 and 38mm). Band clamp allows circular mold to be rotated for operator’s convenience. Carbon block, 3-1/2" diameter (90mm) is 1" (25mm) thick. Smooth reverse side serves as a marvering surface. Mold with wooden handle is 10" (254mm) long.

 SKU: 15724
Price: $80.55 (USD)

This graphite paddle has five cavities—one mild convex, two deep convex and two multi-depth.

 SKU: 157603
Price: $25.65 (USD)

Pattern plates mounted on top quality 8" (203mm) long-nose pliers for mashing molten rod ends. A Fish Fin or Bird Tail impresser forms parallel grooves on both sides of the glass.

 SKU: 1568ff
Price: $89.95 (USD)

6-1/4" (159mm) overall length Matching impression plates make a realistic 7/8" x 1-3/8" (12 x 35mm) curved leaf design.

 SKU: 156804
Price: $27.65 (USD)

1-1/2" (38mm) diameter pad

 SKU: 1569
Price: $53.95 (USD)

Stainless steel die-formed pads mounted on a quality pair of 8" (203mm) nose pliers with insulated cushion grips. Forming pads can be used for making ears, flower petals, roses, fish bodies, etc. NOTE: Design of fish body jaw trims excess glass from formed glass.

 SKU: 156903
Price: $66.95 (USD)

3/4" x 2" (19 x 51mm)

 SKU: 156902
Price: $66.95 (USD)

9-1/2" (241mm) overall length 2" (51mm) square x 1/16" (1.6mm) thick stainless steel pads mounted on a spring-loaded steel frame. Designed for parallel closing which maintains uniform thickness. Insulated with wooden handles.

 SKU: 1579
Price: $19.25 (USD)

This Graphite Micro Paddle has a wooden handle, with a working surface measuring 1" x 4" x 1/4" (25 x 101 x 6mm).

 SKU: 15745
Price: $12.55 (USD)

This six-piece set is made from fine grain, high density graphite. Each tool has a wooden handle, and includes: 3 Rods: 1/4" diameter x 4" (6 x 101mm) sharpened to a point 1/4" diameter x 4" (6 x 101mm) 1/4" diameter x 4" (6 x 101mm) flat on one side 3 Paddles: Rectangular: 1-1/2" x 1-3/4" x 1/4" (38 x 45 x 6mm) Triangular: 1-1/2" x 1-3/4" x 1-3/4" x 1/4" (38 x 45 x 45 x 6mm) Rectangular: 1" x 4" x 1/4" (25 x 101 x 6mm)

 SKU: 1574
Price: $40.65 (USD)

1-7/8" x 4" x 5/8" (48 x 102 x 15.8mm) A combination marver and pattern impresser. One side has a smooth finish, and the other has 12 vertical parallel fins with rounded tops. Rolling the hot gather over the fins produces a linear pattern, a grid pattern or a diamond (pineapple) pattern. Made of solid aluminum. A versatile tool for the beadmaker.

 SKU: 1597
Price: $7.45 (USD)

These shears have a 6" (152mm) overall length, with 2" (51mm) blades. This vintage design is ideal for trimming the ends of hot glass rods, or for using in other soft, hot glass applications.

 SKU: 156401
Price: $6.95 (USD)

An affordable kiln designed specifically for annealing beads, marbles or other small projects like Glaskolben Ornaments.FEATURES:Chamber: 16" W x 6.5" D x 4" H (406 x 152 x 167mm)Door Opening: 16"W x 6.5"D x 4"HController: Infinite control type with analog pyrometer and type K thermocouple.Insulation: Lining is two 8 lb. layers of noncarcinogenic super wool with a surface hardener.Element: Single Kanthal A-1 encapsulated in a quartz tube tested to fire to 110°F (201°C).Overall Measurement: 24" x 12" x 9.5" (610 x 305 x 241mm)Weight: Net 17.5 lbs. (7.9Kg)Shipping: Net 22 lbs. (10Kg)Electrical: Draw 120 volts, 5.4 amps.Service Required: 120 volts, 15 amps.Factory Warranty: 2 years on all parts.

 SKU: 15285
Price: $549.95 (USD)

Pattern plates mounted on top quality 8" (203mm) long-nose pliers for mashing molten rod ends. Leafmakers form a V-vein pattern on one side of the glass.

 SKU: 1568c
Price: $89.95 (USD)

Pattern plates mounted on top quality 8" (203mm) long-nose pliers for mashing molten rod ends. Leafmakers form a V-vein pattern on one side of the glass.

 SKU: 1568f
Price: $89.95 (USD)

(Coarse Curved Jaw) Leafmakers are available with flat or curved impresser plates. Curved models save a step by forming and impressing the design with one squeeze.

 SKU: 156801c
Price: $75.95 (USD)

(Fine Curved Jaw) Leafmakers are available with flat or curved impresser plates. Curved models save a step by forming and impressing the design with one squeeze.

 SKU: 156801f
Price: $75.95 (USD)

This hand-held tool is used for cutting glass rods. A minimum of pressure on the handgrips leaves a clean edge on sliced rods. An adjustable guide centers the rod between the cutter heads. The long-wearing cutter heads may be rotated for longer life. Cutter jaws open to 5/8" (16mm). Optimum cutting can be done on rods up to 3/8" (9mm). Weight is 12-1/2 oz. (354g). 7-1/4" (184 mm) in length.

 SKU: 1564
Price: $25.15 (USD)

1" (25mm) diameter mold Solid cherrywood mold is a professional tool for precise shaping of round glass objects. Designed to be used wet, the mold must be returned to a water bucket after each use and never allowed to dry. The mold will improve with use as a carbon coating forms on the inside surface of the mold well.

 SKU: 15715
Price: $22.95 (USD)

1-1/2" (38mm) diameter mold Solid cherrywood mold is a professional tool for precise shaping of round glass objects. Designed to be used wet, the mold must be returned to a water bucket after each use and never allowed to dry. The mold will improve with use as a carbon coating forms on the inside surface of the mold well.

 SKU: 15717
Price: $22.95 (USD)

1-1/4" (32mm) diameter mold Solid cherrywood mold is a professional tool for precise shaping of round glass objects. Designed to be used wet, the mold must be returned to a water bucket after each use and never allowed to dry. The mold will improve with use as a carbon coating forms on the inside surface of the mold well.

 SKU: 15716
Price: $22.95 (USD)

5/8"(16mm) diameter mold Solid cherrywood mold is a professional tool for precise shaping of round glass objects. Designed to be used wet, the mold must be returned to a water bucket after each use and never allowed to dry. The mold will improve with use as a carbon coating forms on the inside surface of the mold well.

 SKU: 15712
Price: $22.95 (USD)

7/8" (22mm) diameter mold Solid cherrywood mold is a professional tool for precise shaping of round glass objects. Designed to be used wet, the mold must be returned to a water bucket after each use and never allowed to dry. The mold will improve with use as a carbon coating forms on the inside surface of the mold well.

 SKU: 15714
Price: $22.95 (USD)

A handy tool for beadmakers. Flatteners are 1/2" square (12.5mm) on 8" long (203mm) tweezers.

 SKU: 15701
Price: $20.95 (USD)

A handy tool for forming oval bracelets. Infinite sizing from 1-11/16" x 1-7/8" to 1-7/16" x 2-3/4" (42 x 48mm to 62 x 70mm). Heavy iron mandrel has a tang at the base for a clamp. NOTE: To avoid thermal shock, the mandrel should be heated when forming soda lime glass.

 SKU: 1605
Price: $54.15 (USD)

3" x 4" x 3/8" (76 x 101 x 9.5mm) Rectangular paddle made from fine grain, high density graphite with a wooden handle.

 SKU: 1572
Price: $19.95 (USD)

8-3/4" (222mm) length Heavy-duty pliers with 1-1/2" (38mm) square mashing plates. Plates remain parallel when squeezed. Spring maintains open position until squeezed. Maximum open position: 11/16" (17.5mm).

 SKU: 157901
Price: $35.95 (USD)

A diamond-sharpened edge for easy glass scoring. The tungsten carbide blade remains sharp under hard use. The handle is tooled from hex aluminum so it won't roll off the bench or melt from high heat.

 SKU: 1567
Price: $35.35 (USD)

These Stainless Steel Tweezers are available in your choice of three lengths: 6, 8, or 10 inches in overall length.

 SKU: 1575
Price: $7.35 (USD)

This tool consists of a graphite paddle with two flat and two convex cavities.

 SKU: 157601
Price: $25.65 (USD)

Use to make a Star Murrini. Form a 3/4" (19mm) gather of glass, approx. 2" (5mm) long. Punty an end. Heat at pinch point and pinch along the cylinder side to form a star leg. Repeat as needed, then pull to desired diameter.

 SKU: 156905
Price: $18.65 (USD)

Developed for Loren Stump, renowned glass sculptor, it is used to vacuum encase small glass sculptures for beads, buttons, paperweights, etc. It consists of a perforated graphite disk over which the sculpture is placed. This in turn is placed in a 2-inch graphite cup with a tube through which the vacuum is drawn. A glass glob, heated to a soft state, is placed over the sculpture. Advanced lampworking skill is a requisite. Shown with optional hose set with filter.

 SKU: 15621
Price: $69.95 (USD)